Filter
Top Products
APPENDIX B: BIOS Settings
98
HSC FW Revision (HSBP) Firmware revision of
the Hotswap
controller. N/A if not
present.
Remote Access
Configuration
Remote Access Disabled
Enabled
Serial Port Number (Base
address and IRQ)
COM1
Serial Port Mode 115200 8,n,1
57600 8,n,1
19200 8,n,1
09600 8,n,1
Flow Control None
Hardware
Software
Redirection After BIOS POST Disabled
Boot Loader
Always
Terminal Type ANSI
VT100+
VT-UTF8
VT-UTF8 Combo Key Support Disabled
Enabled
IPMI Configuration
Status of BMC
BMC Firmware Revision
View BMC Event Log Provides data on
event log
Clear BMC System Event Log
BMC PEF Status Disabled
Enabled
Toggle PEF No
Yes
IOat Disabled
Enabled
Restore on AC Power
Loss
Power Off
Power On
Last State
Wake on RING
function
Disabled
Enabled
Exit
Save Changes and Exit (F10)
Discard Changes and Exit
BIOS menu BIOS submenu Setting Value