www.gateway.com
85
Environmental specifications
The following specifications identify maximum environmental conditions. At no time should the
server run under conditions which violate these specifications.
Electronic specifications
Memory map
SATA
2 SFF 8087 connectors to support as many as 6 SATA devices.
ACPI
ACPI 2.0b compliance
Supports:
■
S0
■
S1
■
S5
Variable Requirements
Temperature Nonoperating: -40° to 158°F (-40° to 70°C)
Operating: 50° to 95°F (10° to 35°C) with a maximum rate of change not
to exceed 10° per hour
Humidity Nonoperating: + 10% to +95%
Operating: +20% to +80%
Acoustic noise Sound Pressure: 58 dBA (Rackmount) in an idle state at typical office
ambient temperature. (73.4 +/- ° F) Sound Power: 6.8 BA in an idle state
at typical office ambient temperature. (73.4 +/- 3.6° F)
Shock Operating - 5.0 g, 11 mSec, 1/2 sine
Unpackaged - 25 g, velocity change 136 inches/sec
( 40 lbs to > 80 lbs).
Packaged - Non-palletized free fall in height 24 inches ( 40 lbs to > 80 lbs)
Vibration Unpackaged - 5 Hz to 500 Hz, 2.20 g RMS random
Electrostatic
discharge (ESD)
Tested to +/-15 kV - direct contact
+/- 8kV - air discharge
System cooling
requirement in
BTU/Hr
2219 BTU/hour for one 650 W power supply module
4438 BTU/hour for two 650 W power supply modules
Address Range (hex) Amount Function
0 to 07FFFFh 640 KB DOS region, base system memory
0A0000h to 0BFFFFh 128 KB Video or SMM memory
0C0000h and 0DFFFFh 128 KB Expansion card BIOS and buffer area
0E0000h to 0FFFFFh 128 KB System BIOS
0E0000h to 0EFFFFh 2 MB Extended system BIOS
FC000000h to FFFFFFFFh 64 MB PCI memory space