Filter
Top Products
www.gateway.com
11
Some surge protectors and uninterruptible power supplies include simple line-conditioning
capabilities.
Uninterruptible power supplies
Use an uninterruptible power supply (UPS) to protect your server from data loss during a total
power failure. A UPS uses a battery to keep your server running temporarily during a power
failure and lets you save your work and shut down your server. You cannot run your server for
an extended period of time while using only the UPS. To buy a UPS, visit accessories.gateway.com
.
Mounting your server into a cabinet
The fixed-rail cabinet mounting hardware included with your server should be used with standard
4-post cabinets that have front and back vertical posts. If your cabinet is a different type, obtain
mounting hardware from the cabinet manufacturer.
The fixed-rail rackmount kit contents:
• Front server rails (2)
• Back server rails (2)
• Fastener pack (1)
• Locking screws (4)
• Mounting nuts (4)
• Mounting screws (4)
If you ordered the optional tooless-rail kit for your server, refer to the instructions included in
the kit.
To mount your server in a cabinet:
1 Align the slots in the front server rails with the studs on the side of the server, then engage
the slots with the studs and slide the rails forward until they stop.
2 Align the locking screw holes in the rails with the threaded screw holes in the server, then
install one locking screw through the each front server rail.
Caution
Before attaching cabinet accessories, make sure that the server is turned off and
all power cords are unplugged.
Caution
The cabinet must provide sufficient airflow to the front of the server to maintain
correct cooling.
Stud
Stud
Locking screw (installed)
Front server rail (installed)