Filter
Top Products
CHAPTER 2: Setting Up Your Server
12
3 Align the slots in the back server rails with the studs on the side of the server, then engage
the slots with the studs and slide the rail forward until it stops.
4 Align the locking screw holes in the rails with the threaded screw holes in the server, then
install one locking screw through the each back server rail.
5 Attach mounting nuts to the two front cabinet posts where you plan to install the server.
Stud
Stud
Locking screw (installed)
Back server rail
(installed)
Front cabinet post
Mounting nut