CHAPTER 4: Installing Components
56
16 Reinstall the PCI riser assembly by following the instructions in “Installing and removing
PCI expansion cards” on page 39.
17 Reinstall the system fans and fan cage by following the instructions in “Replacing system
fans” on page 41.
18 Follow the instructions in “Closing the server case” on page 30.
19 Turn on your server, then press F2 when the Gateway logo screen appears during startup.
The BIOS Setup utility opens.
20 Check BIOS settings to make sure that they detect the server’s new hardware, then save
your changes (if any) and close the BIOS Setup utility.
21 If your server does not start after installing the new system board, contact Gateway
Customer Care. For more information, see “Getting Help” on page 8.