Gateway GT5448E Personal Computer User Manual


 
CHAPTER 4: Upgrading Your Computer
30
Preventing static electricity
discharge
The components inside your computer are extremely sensitive
to static electricity, also known as electrostatic discharge
(ESD).
Before opening the computer case, follow these guidelines:
Wear a grounding wrist strap (available at most
electronics stores) and attach it to a bare metal part of
your computer.
Turn off your computer.
Touch a bare metal surface on the back of the computer.
Unplug the power cord and the modem and network
cables.
Before working with computer components, follow these
guidelines:
Avoid static-causing surfaces such as carpeted floors,
plastic, and packing foam.
Remove components from their antistatic bags only
when you are ready to use them. Do not lay
components on the outside of antistatic bags because
only the inside of the bags provide electrostatic
protection.
Always hold expansion cards by their edges or their
metal mounting brackets. Avoid touching the edge
connectors and components on the cards. Never slide
expansion cards or components over any surface.
Warning
To avoid exposure to dangerous electrical voltages and moving parts,
turn off your computer and unplug the power cord and modem and network
cables before opening the case.
To prevent risk of electric shock, do not insert any object into the vent holes
of the power supply.
Caution
ESD can permanently damage electrostatic discharge-sensitive
components in your computer. Prevent ESD damage by following ESD guidelines
every time you open the computer case.
8511861.book Page 30 Monday, December 18, 2006 11:20 AM