Filter
Top Products
CHAPTER 4: Upgrading Your Computer
52
4 Remove the screw that secures the I/O panel to your
computer, then remove the I/O panel from your
computer.
5 Insert the new I/O panel into your computer, then
replace the screw.
6 Connect the I/O panel cable to the new I/O panel.
7 Replace the front bezel by following the instructions in
“Replacing the front bezel” on page 32.
8 Replace the side panel by following the instructions in
“Replacing the side panel” on page 33.
Adding or replacing an
expansion card
To add or replace an expansion card:
1 Remove the side panel by following the instructions in
“Removing the side panel” on page 31.
2 If you are replacing an expansion card, go to the next
step. If you are adding a new expansion card, go to
Step 4.
3 Disconnect any cables that are attached to the card,
noting their locations and orientation. (You may need
to reconnect the cables after you install the new card.)
Screw
8511861.book Page 52 Monday, December 18, 2006 11:20 AM