Filter
Top Products
www.gateway.com
45
Replacing the front fan
To replace the front fan:
1 Remove the side panel by following the instructions in
“Removing the side panel” on page 31.
2 Pull the front fan away from the system board, then
remove it.
3 Disconnect the fan cable from the system board.
4 Connect the new fan cable to the system board, then
insert the new fan into place.
Tools
You need a Phillips screwdriver to replace the front fan.
Important
The location of the fan connection may vary, so make sure that
you trace the fan cable from the fan to the system board.
8511861.book Page 45 Monday, December 18, 2006 11:20 AM