CHAPTER 4: Upgrading Your Computer
52
9 Replace the front bezel by following the instructions in
“Replacing the front bezel” on page 44.
10 Replace the side panel by following the instructions in
“Replacing the side panel” on page 44.
Adding or replacing the
memory card reader
To add or replace the memory card reader:
1 Remove the side panel by following the instructions in
“Removing the side panel” on page 41.
2 Remove the front bezel by following the instructions in
“Removing the front bezel” on page 43.
3 If you are adding a memory card reader, slide the drive
release latch to the left to unlock it, then go to Step 7.
- OR -
If you are replacing a memory card reader, proceed to
the next step.
4 Disconnect the memory card reader cables, noting their
locations and orientation. (You will reconnect the cables
after you install the new memory card reader.)
8512066.book Page 52 Tuesday, January 16, 2007 11:02 AM