Filter
Top Products
105
Appendix
What happens when Fax/Tel Mode is selected
To select Fax/Tel Mode
1
Press [RECEIVE MODE] until “Fax/Tel Mode” appears on the LCD.
To change the Fax/Tel Mode settings:
1
Press [FUNCTION].
2
Press [ ] until RX SETTINGS is displayed in the LCD. Press [START/COPY].
3
Press [ ] until FAX/TEL SWITCH is displayed in the LCD. Press [START/COPY].
4
LCD displays RING START TIME. Press [START/COPY]. Choose between 0-30 SECONDS (enter your
selection using the numeric buttons) and press [START/COPY] again.
5
LCD displays F/T RING TIME. Press [START/COPY]. Choose between 10-45 SECONDS (enter your
selection using the numeric buttons) and press [START/COPY] again.
6
LCD displays F/T SW ACTION. Press [START/COPY]. Press [ ] or [ ] to choose between RECEIVE
and DISCONNECT. Press [START/COPY].
7
Press [STOP] to finish registration and return to the standby mode.