Filter
Top Products
5
1
Assembling the FAXPHONE
■ Faceplate
Fit the 4 tabs of the faceplate into the corresponding slots around the One-touch button area.
Connecting the AC power cord _________________
Plug the FAXPHONE into a 120 volt AC 60 Hz three-wire grounded outlet.
1
Plug the power cord connector into the
rear of the unit.
2
Plug the other end of the power cord
into a properly grounded AC outlet
(three-prong outlet).
There is no power switch on the FAXPHONE. The
power is on as long as the FAXPHONE is plugged
in.
The faceplate may be installed on the FAXPHONE. If you cannot find
the faceplate, check the One-touch button area of the FAXPHONE.