Filter
Top Products
Setup Mode
26 312776F
Password Screen
If a password has been activated (see Configure
Screen 1, page 29), the Password screen will appear.
You must enter the password to access the Set Up
Home Screen. Entering the wrong password returns the
display to the Status Screen.
NOTE: If you forget the password, you can reset the
password (to 0), using the ProMix 2KS Web Interface
(see manual 313386).
NOTE: If a password is activated, Setup Locked dis-
plays momentarily after exiting Setup mode and return-
ing to the Status Screen. A lock symbol appears
on the Status Screen.
Set Up Home Screen
This screen displays when you enter Setup mode. From
it you can go to Recipe and Advanced Setup Screens
(pages 34-42) or System Configuration Screens
(pages 28-31). Press the Enter key to go to the
selected screen set.
The screen also displays software versions and internet
addresses of various components. The values shown in
F
IG. 20 are only examples and may vary on your screen.
See Table 4 for further information.
F
IG. 18. Password Screen
F
IG. 19. Setup Locked Screen
FIG. 20. Set Up Home Screen