Filter
Top Products
3-83-8
3-83-8
3-8 Copying
TE (Text Enhancement)
The TE (Text Enhancement) setting sharpens the edges of black text. It
should be turned on in most situations. Turn off TE if
✦ stray dots of color surround some text
✦ large, black typefaces have a splotchy (not smooth) appearance
✦ thin, colored objects or lines contain black spots
11
11
1 With TE displayed on the front panel display, use the Plus (+) and Minus
(–)
buttons to cycle between o (off) and ● (on).
22
22
2 To confirm your selection, press Select/Resume.
ELC (Enhance Light Colors)
Use ELC (Enhance Light Colors) to copy very pale colors. Turn on ELC if
very pale colors are printing as white.
11
11
1 With ELC displayed on the front panel display, use the Plus (+) and Minus
(–) buttons to cycle between o (off) and
● (on).
22
22
2 To confirm your selection, press Select/Resume.
Setting DefaultsSetting Defaults
Setting DefaultsSetting Defaults
Setting Defaults
If you consistently use a setting on the front panel other than the default,
you can establish that setting as the default.
NOTENOTE
NOTENOTE
NOTE The default setting is always indicated by a black dot (
●).
For example, to set Reduce/Enlarge to Auto Fit, follow these steps:
11
11
1 Press the Reduce/Enlarge button until Auto Fit is displayed, and then press
Select/Resume.
22
22
2 Press the Menu button until Set Defaults is displayed.
33
33
3 Press Select/Resume. Current settings saved as defaults is displayed.