Filter
Top Products
5-25-2
5-25-2
5-2 Copy Access Controllers
Installing a Copy ControllerInstalling a Copy Controller
Installing a Copy ControllerInstalling a Copy Controller
Installing a Copy Controller
11
11
1 Turn off the HP Color Copier 210.
22
22
2 Plug the copy controller into the port in the back of the HP Color
Copier 210.
33
33
3 Turn on the copy controller and then the HP Color Copier 210.
44
44
4 Press the menu button until Copy Controller is displayed on the front panel
display.
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION After you have activated a copy controller, you will be able to make copies only
if the copy controller is attached.
55
55
5 To activate the copy controller, press Select/Resume.
66
66
6 To confirm, press Select/Resume again. Pressing any other key will cancel
activating the copy controller.
Using a Copy ControllerUsing a Copy Controller
Using a Copy ControllerUsing a Copy Controller
Using a Copy Controller
After a copy controller has been activated, the only way to make copies is
through the copy controller. If a person tries to make a copy without using
the copy controller, the following message will appear:
Cannot copy. Access through copy controller.
If the copy controller is turned off, disconnected, or otherwise disabled, the
following message will appear:
Cannot copy. Copy controller disconnected.