Filter
Top Products
Scripting, command line, and utility options 152
IP_ADDRESS is used to select the IP address for the RILOE II if DHCP is not enabled. If an empty string is
entered, the current value is deleted.
SUBNET_MASK is used to select the subnet mask for the RILOE II if DHCP is not enabled. If an empty
string is entered, the current value is deleted.
GATEWAY_IP_ADDRESS is used to select the default gateway IP address for the RILOE II if DHCP is not
enabled. If an empty string is entered, the current value is deleted.
DNS_NAME is used to specify the DNS name for the RILOE II. If an empty string is entered, the current
value is deleted.
DOMAIN_NAME is used to specify the domain name for the network where the RILOE II resides. If an
empty string is entered, the current value is deleted.
DHCP_GATEWAY specifies if the DHCP-assigned gateway address is to be used. The possible values are
"Yes" or "No." It is case sensitive. This selection is only valid if DHCP is enabled.
DHCP_DNS_SERVER specifies if the DHCP-assigned DNS server is to be used. The possible values are
"Yes" or "No." It is case sensitive. This selection is only valid if DHCP is enabled.
DHCP_WINS_SERVER specifies if the DHCP-assigned WINS server is to be used. The possible values are
"Yes" or "No." It is case sensitive. This selection is only valid if DHCP is enabled.
DHCP_STATIC_ROUTE specifies if the DHCP-assigned static routes are to be used. The possible values are
"Yes" or "No." It is case sensitive. This selection is only valid if DHCP is enabled.
REG_WINS_SERVER specifies if the RILOE II needs to register with the WINS server. The possible values
are "Yes" or "No." It is case sensitive. This selection is only valid if DHCP is enabled.
PRIM_DNS_SERVER specifies the IP address of the primary DNS server. This parameter is only relevant if
the DHCP-assigned DNS server address feature is disabled. If an empty string is entered, the current value
is deleted.
SEC_DNS_SERVER specifies the IP address of the secondary DNS server. This parameter is only relevant if
the DHCP-assigned DNS server address feature is disabled. If an empty string is entered, the current value
is deleted.
TER_DNS_SERVER specifies the IP address of the tertiary DNS server. This parameter is only relevant if the
DHCP-assigned DNS server address feature is disabled. If an empty string is entered, the current value is
deleted.
PRIM_WINS_SERVER specifies the IP address of the primary WINS server. This parameter is only relevant
if the DHCP-assigned WINS server address feature is disabled. If an empty string is entered, the current
value is deleted.
SEC_WINS_SERVER specifies the IP address of the secondary WINS server. This parameter is only
relevant if the DHCP-assigned WINS server address feature is disabled. If an empty string is entered, the
current value is deleted.
STATIC_ROUTE_1, STATIC_ROUTE_2, and STATIC_ROUTE_3 are used to specify the destination and
gateway IP addresses of the static routes. The following two parameters are used within the static route
commands. If an empty string is entered, the current value is deleted.
• DEST specifies the destination IP addresses of the static route. This parameter is only relevant if the
DHCP-assigned static route feature is disabled. If an empty string is entered, the current value is
deleted.
• GATEWAY specifies the gateway IP addresses of the static route. This parameter is only relevant if
the DHCP-assigned static route feature is disabled. If an empty string is entered, the current value is
deleted.
WEB_AGENT_IP_ADDRESS specifies the address for the Web-enabled agents. If an empty string is
entered, the current value is deleted.