Filter
Top Products
Scripting, command line, and utility options 166
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="read">
<GET_VF_STATUS/>
</RIB_INFO>
</LOGIN>
</RIBCL>
GET_VF_STATUS Parameters
There are no parameters for this command.
GET_VF_STATUS Runtime Errors
There are no errors for this command.
GET_VF_STATUS Return Messages
The following information is returned within the response:
BOOT_OPTION = BOOT_ALWAYS | BOOT_ONCE | NO_BOOT
WRITE_PROTECT_FLAG = YES | NO
IMAGE_INSERTED = YES | NO
SET_VF_STATUS
The SET_VF_STATUS command sets the Virtual Floppy Drive status on the RILOE II. The SET_VF_STATUS
command must be displayed within a RIB_INFO element, and RIB_INFO must be in write mode. All the
parameters in the command are optional. The user must be logged in with virtual media privilege to
execute this command.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="write">
<SET_VF_STATUS>
<VF_BOOT_OPTION="BOOT_ONCE"/>
<VF_WRITE_PROTECT value="Yes"/>
</SET_VF_STATUS>
</RIB_INFO>
</LOGIN>
</RIBCL>
SET_VF_STATUS Parameters
VF_BOOT_OPTION specifies the boot option parameter for the Virtual Floppy. The possible values are
"BOOT_ALWAYS", "BOOT_ONCE", or "NO_BOOT." The value is case sensitive.
VF_WRITE_PROTECT sets the write-protect flag value for the Virtual Floppy. The possible values are "Yes"
or "No."