Filter
Top Products
&
OPTION ACCESSIBILITY: Through Port 1 of Module 1 only.
By responding to the Enter request: message at the end of the main
configuration menu (
see Section 8.1
) with "9" for any serial module or
"8" for the M24SII-V02 high speed parallel module (Program I.D. Page
Message), you may program the content of this identifying message.
The Model 24SII DES will respond with:
Enter Request :9
I.D. Page Message is :
This Print Job is from :
Enter C to change, or ENTER for no change :
If you desire to make a change, enter "C". The Model 24SII DES will
respond with:
Enter I.D Page Message (Max. 40 characters)
Control-C to terminate or no change :
Enter the new message, followed by Control-C. Note that the
message will print on paper exactly as it is placed on the CRT screen.
The message may appear on one line or several lines. If several lines
are desired, each line must be ended by Enter and Line Feed (^J).
For example, if you entered THIS IS THE NEW MESSAGE, the Model
24SII DES will respond with:
I.D. Page Message is :THIS IS THE NEW MESSAGE
Enter C to change, or ENTER for no change :
If no change in the message is desired, strike the Enter key, and the
current message will be retained. The Model 24SII DES will save the
new I.D. Page Message permanently in non-volatile memory and will
subsequently power-up with that message in effect.
The Model 24SII DES will now return to the main configuration menu
(see
Section 8.1
).