Filter
Top Products
The configuration process
19
To configure parameters
1
If you have not already done so, turn the digital sender on.
2
Press S
ETUP
(A
LT
+F4) from the main menu to go to the setup
menu.
3
Press S
ETTINGS
(F2) and use the arrow keys to highlight the
General
configuration menu from the list which appears. Press
O
K
(F1).
4
In the configuration menu, use the arrow keys to scroll to a
parameter you want to modify and then press C
HANGE
(F3).
5
Configure the parameters by selecting a value from a list using
the arrow keys or by typing in a value.
6
When finished, press O
K
(F1). Choose another parameter from
the menu.
7
When finished with the
General
configuration menu, press S
AVE
(F1).
8
Repeat steps 3 through 7 for the
Network
,
E-Mail
,
I-Fax
, and
Advanced
configuration menus.