HP (Hewlett-Packard) 3100C Fax Machine User Manual


 
28
WINS Server
Address
IP address of the WINS server. Used for WINS (Windows
Internet Naming Service) symbolic name resolution if you
identify servers and devices on your network by network name
instead of by IP address.
C
LEAR
sets the address to 0.0.0.0.
If left blank or set to 0.0.0.0, the function is disabled.
E-mail Menu
E-mail Server Addr. IP address of the e-mail SMTP-MIME server.
C
LEAR
sets the address to 0.0.0.0.
If left blank or cleared, the e-mail service is disabled. Both the
E-mail Server Addr. and E-mail Default From parameters must
be enabled for the e-mail service to work.
E-mail Default From Default e-mail address for the
FROM
field in e-mail messages
from the digital sender. This default address is used
only
when
users have not registered at the control panel and send an
e-mail message without entering anything in the
FROM
field.
Up to 255 characters are allowed.
If left blank or cleared, the e-mail service is disabled. Both the
E-mail Server Addr. and E-mail Default From parameters must
be enabled for the e-mail service to work.
Note: You must provide a default e-mail address to prevent
users from sending anonymous e-mail messages.
E-mail Default
Subject
Default text for the
SUBJECT
field in e-mail messages sent by
the digital sender.
This default text is used
only
when users do not provide a
subject of their own directly from the control panel keypad.
Up to 128 characters are allowed.
E-mail Quality Default image quality used for documents sent by e-mail.
Choices: B/W Document, Color Document, Color-B/W Photo.
E-mail File Format Default format for documents sent by e-mail.
Choices: PDF or TIFF
Auto BCC Function
Enabled
Registered user who activates the copy self option in the user
profile receives a copy of any e-mail message the user sends
from the digital sender.
LDAP Server
Address
IP address of the server that hosts the LDAP (Lightweight
Directory Access Protocol) directory for e-mail address
searches.
C
LEAR
sets the address to 0.0.0.0.
If left blank or cleared, the function is disabled.
Configuration parameters on the control panel (continued)
Parameter Description