Filter
Top Products
29. Locate the pin into the interior of the right leg.
Attach the stand
1. Identify the left and right of the printer. This information is shown on the foam end packs. Also
identify the rear of the printer.
2. Pull open the protective plastic from the base of the printer. Please ensure there is a three-
meter space clear of obstructions to the rear of the printer and one meter at the front of the
printer. Remove the two desiccant bags from the printer.
3. Using the screwdriver supplied, remove the two screws that hold drawer 1 in place.
56 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]