14. If Reseat is displayed on the front panel, check that the protective tape has been removed.
Then try reseating the printhead more firmly. If the problem persists, see
I cannot insert a
printhead.
15. Close the carriage assembly cover.
16. Make sure the latch engages correctly.
17. Close the printer window.
18. Please wait while the printer checks the printheads (~1 minute).
Install the printhead cleaners
1. Wait until you see this front panel message.
74 Chapter 3 How do I... (printer assembly topics) [4500] ENWW
How do I... (printer
assembly topics) [4500]