Filter
Top Products
Removal and Installation
8-9
HP DesignJet 430, 450C and 455CA Printers
Removing the Rollfeed Assembly
Refer to figure 1.
Removal
1. Remove one screw (Item 1) from the rear that attaches the Right Rollfeed
Assembly (Item 2) to the Printer.
2. Slide the Right Rollfeed Assembly (Item 2) forward and remove it from
the Printer.
3. Remove one screw (Item 1) from the rear that attaches the Left Rollfeed
Assembly (Item 3) to the Printer.
4. Slide the Left Rollfeed Assembly (Item 3) forward and remove it from the
Printer.
2
3
1
Figure 1: Rollfeed Assembly