Filter
Top Products
8-54 Removal and Installation
HP DesignJet 430, 450C and 455CA Printers
4. Inserting a screwdriver under the sideĆplate on the right of the entry
platen, lever the entry platen over to the left, so that it is flush against the
left sideĆplate.
There must be no space between the entry platen and the right
sideĆplate. It doesn't matter if there is a small space between the entry
platen and the left sideĆplate.
5. Replace the screw (item 1) on the rightĆhand side and the screw (item 3)
on the leftĆhand side.
1. Tighten the screws, making sure that the entry platen is aligned tight
against the right sideĆplate.