Filter
Top Products
134 Printer Interfaces
EN
To configure the Novell NetWare parameters from the
printer control panel
1 Press M
ENU
until
HP EIO 1
or
2MENU
displays.
2 Press I
TEM
until
CFG NETWORK=NO
displays.
3 Press V
ALUE
until
CFG NETWORK=YES
displays.
4 Press S
ELECT
once.
CFG NETWORK=YES
displays.
5 Press I
TEM
until
CFG IPX/SPX=NO
displays.
6 Press V
ALUE
until
CFG IPX/SPX=YES
displays.
7 Press S
ELECT
once.
CFG IPX/SPX=YES
displays.
8 Press I
TEM
until
FRAME=AUTO
displays.
9 To configure the frame type setting protocol, press V
ALUE
to select
one of the frame types from the following table:
10 Press S
ELECT
to save the value. An asterisk (
*
)displays.
11 If you are finished, press G
O
to return the printer to the
READY
state.
– OR –
See the appropriate sections for other protocols that will be used.
Frame type Description
AUTO (default) All listed Novell frame types will be allowed.
EN_8023 Limits frame types to IPX over IEEE 802.3 frames.
All others will be counted and discarded.
EN_II Limit frame types to IPX over Ethernet II frames.
All others will be counted and discarded.
EN_8022 Limit frame types to IPX over IEEE 802.2 with
Ethernet frames. All others will be counted and
discarded.
EN_SNAP Limit frame types to IPX over SNAP with Ethernet
frames. All others will be counted and discarded.