Filter
Top Products
EN
Chapter 9 201
Faded print, faded areas, or faded vertical
streaks
● The message
TRANSFER KIT LOW ORDER KIT
appears on the
printer control panel. Print out a configuration page to verify the
remaining life of the transfer belt. Replace the transfer belt if
necessary.
● The moisture content of your paper is uneven or too low. Use
paper from a different source or from an unopened ream of paper.
● Some areas of the paper reject toner. Use paper from a different
source or from an unopened ream of paper.
● Your paper is excessively rough. Use a smoother, xerographic
paper.
● The letterhead you are using is printed on rough paper. Use a
smoother, xerographic paper. If this solves your problem, consult
with the printer of your letterhead to verify that the paper used
meets the specifications for this printer (see page 67
).
● Media does not meet the specifications for this printer (see
page 67).
● The printer is operating in excessively humid or dry conditions.
Verify that the printing environment is within humidity
specifications (see page 235
).
● If a
TONER LOW
or
TONER OUT
message is displayed on the
printer control panel, replace the appropriate toner cartridge. If
the problem persists, call for service.
● Excess toner may have been deposited on the transfer belt. Use
a lint-free cloth to clean any excess toner from the transfer belt
surface.
● The cap on the ITB lift mechanism might be missing.