Filter
Top Products
Enclosure network configuration commands 108
SHOW SNMP
• Command:
SHOW SNMP
• Description:
Displays the SNMP configuration, including:
o SNMP system name
o Location
o Contact
o Read community name
o Write community name
o Engine ID
o List of the trap destinations
• Access level/Bay level:
All
• Restrictions:
None
• Example:
OA> SHOW SNMP
SNMP Configuration:
Status: Enabled
System Name: USE818AMMS
System Location: bottom rack1
System Contact: admin@localhost
Read Community Name: public
Write Community Name: private
Engine ID: 0x8000000b0466697665
Trap Receiver host: 16.84.189.215 public
localhost private
16.84.189.215 bob authPriv v3
SHOW SNMP USER
• Command:
SHOW SNMP USER {LIST |"<username>"}
• Description:
Displays the current information regarding SNMPv3 users. If LIST is specified, the list of current users
is displayed. If a user name is specified, information regarding that user is displayed.
• Access level/Bay level:
All
• Restrictions:
None