Filter
Top Products
Interconnect management commands 177
Current PowerDelay Status: Not in Progress
Bay Device PowerDelay State Delay (seconds)
--- -------------------------------- ------------
1 Cisco Catalyst Blade Switch 3120 Disabled
2 Absent Disabled
3 Absent Disabled
4 Absent Disabled
SHOW INTERCONNECT SESSIONS
• Command:
SHOW INTERCONNECT SESSIONS
• Description:
Displays which users have serial console sessions in progress for each interconnect
• Access level/Bay level:
OA administrator, OA operator
Bay specific
• Restrictions:
You must have access to the specified bay.
• Example:
OA-0018FE27577F> SHOW INTERCONNECT SESSION
Interconnect Bay User
------------------ --------------
No Interconnect remote console sessions were detected.
SHOW INTERCONNECT STATUS
• Command:
SHOW INTERCONNECT STATUS {ALL | <bay number> | <bay number>-<bay number>}
• Description:
Displays interconnect status information.
• Access level/Bay level:
All
Bay specific
• Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
• Example:
OA-0018FE27577F> SHOW INTERCONNECT STATUS ALL
Interconnect Module #1 Status:
Status : OK
Thermal: OK
CPU Fault: OK
Health LED: OK
UID: Off
Powered: On
Diagnostic Status: