Filter
Top Products
Enclosure network configuration commands 98
SET LOGIN_BANNER_TEXT <end marker> <\n> <banner text> <\n> <end marker>
• Description:
Sets the login banner text to be displayed when the user attempts to log in to the Onboard
Administrator.
To enter the login banner text:
a. Start with a string that does not appear within the certificate (the end marker).
b. Insert a newline character by pressing Enter.
c. Paste in the certificate.
d. Insert a newline character by pressing Enter.
e. Insert the end marker.
f. Issue the command by pressing Enter.
Failure to give a proper end marker before and after the banner text might cause the interface to wait
for the appropriate end marker indefinitely.
• Access level /Bay level:
OA administrator
• Restrictions:
o This command is only available in script mode.
o The end marker must not consist of all numeric characters (for example, 1245, 85213, and so on).
o The minimum length of the banner text must be 1 character and the banner text cannot exceed 1500
characters.
o The command accepts English (ASCII) characters only.
o The characters ‘%’ and ‘\’ are not permitted as part of the banner text itself, but you can use them
as characters in the end marker to make a unique string.
o The banner text must contain at least one visible character.
SET NTP POLL
• Command:
SET NTP POLL <seconds>
• Description:
Sets the polling interval of the NTP servers
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
Poll time should be between 60 and 86,400 seconds.
SET NTP PRIMARY
• Command:
SET NTP PRIMARY <host>