Filter
Top Products
Enclosure network configuration commands 89
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
o An IPv4 DNS server must be configured on the Onboard Administrator, and the devices to be
accessed must be registered for reverse lookup with the DNS name server.
o A DNS IP address must be configured on the Onboard Administrator (use the ADD OA DNS (on page
75) command).
ENABLE HTTPS
• Command:
ENABLE HTTPS
• Description:
Enables HTTPS access to the Onboard Administrator
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
None
ENABLE IPV6DYNDNS
• Command:
ENABLE IPV6DYNDNS [<bay number> | ACTIVE | STANDBY]
• Description:
Enables Dynamic DNS using IPv6 for either the specified bay, Active Onboard Administrator, or
Standby Onboard Administrator. DDNS allows you to use a host name for the Onboard Administrator.
The host name is registered with a DNS server. DDNS (DDNS) updates the DNS server with new or
changed records for IP addresses. This allows you to use the same host name over time, although the
dynamically assigned IP address might change.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
IPv6 Dynamic DNS requires that a valid DNS server (either IPv4 or IPv6) be configured on the Onboard
Administrator.
ENABLE LOGIN_BANNER
• Command:
ENABLE LOGIN_BANNER
• Description:
Enables the display of the configured login banner when the user attempts to log in to the Onboard
Administrator.