HP SIM commands 48
OA administrator
• Restrictions:
o Do not include the network prefix length with IPv6 addresses.
o When the Onboard Administrator is operating in FIPS Mode, the minimum RSA key length is 2048
bits, and the signature hash algorithm must be SHA1, SHA-224, SHA-256, SHA-384, or SHA-512.
o Onboard Administrator 4.11 and later contains HP SSO application support for determining the
minimum SSO certificate requirements.
REMOVE HPSIM CERTIFICATE
• Command:
REMOVE HPSIM CERTIFICATE "<certificate name>"
• Description:
Removes the trust certificate corresponding to the <certificate name>. Disables HP SIM SSO through the
application (for example HP SIM) that provided the certificate without disabling other HP SIM
applications.
The <certificate name> can be obtained using the SHOW HPSIM INFO command.
• Access level/Bay level:
OA administrator
• Restrictions:
None
SET HPSIM TRUST MODE
• Command:
SET HPSIM TRUST MODE {CERTIFICATE [ON] | DISABLED [OFF]}
• Description:
Enables or disables the HP SIM SSO mode. When enabled, the trusted applications can access the
Onboard Administrator GUI data without requiring additional authentication.
• Access level/Bay level:
OA administrator
• Restrictions:
The CERTIFICATE (On) mode trusts only applications with certificates that have been uploaded to the
Onboard Administrator.
SHOW HPSIM INFO
• Command:
SHOW HPSIM INFO
• Description:
Displays the current HP SIM SSO configuration for the Onboard Administrator.