Filter
Top Products
Enclosure Bay IP Addressing commands 67
SET EBIPAV6 SERVER NONE 3
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
o The <IPv6 address> must be in the form
####:####:####:####:####:####:####:####/###, where #### ranges from 0 to FFFF. A
compressed version of the same IPv6 address is also supported.
o The /prefix length ranges from 0 to 128. The prefix length is mandatory except when specifying the
address of the gateway.
o Do not use the fe80::/10 prefix when configuring EBIPA-assigned addresses, as this network prefix
is reserved for link local SLAAC addresses.
o For the gateway, do not specify a prefix. The gateway is assumed reachable from within the
network.
Regardless of the type of IPv6 address specified, the GUI always displays the Link-Local IPv6
address of the gateway. If no gateway exists at the Link-Local IPv6 address, no iLO gateway will be
configured.
o The <domain name> is a string containing letters (a–z, A–Z), digits (0–9), or a dash (-). To clear the
domain name, use an empty string enclosed by double quotes ("").
o For EBIPA IPv6 fixed addresses to be successfully configured, the IPv6 protocol must be enabled. To
enable this setting, see the ENABLE IPV6 (on page 90, "ENABLE EBIPAV6" on page 61) command.
The SLAAC and DHCPv6 settings have no effect on EBIPA IPv6 functionality.
• Example:
OA-A0B3CCE63B65> set ebipav6 server 4001::4bbc/64 all
Entering anything other than 'YES' will result in the command not executing.
Changing the IPv6 address for device (iLO) bays that are enabled
causes the iLOs in those bays to be reset.
Are you sure you want to change the IPv6 address for the specified
device (iLO) bays? yes
Successfully set device (iLO) bay # 1 to IPv6 address 4001::4bbc/64
Successfully set device (iLO) bay # 2 to IPv6 address 4001::4bbd/64
Successfully set device (iLO) bay # 3 to IPv6 address 4001::4bbe/64
Successfully set device (iLO) bay # 4 to IPv6 address 4001::4bbf/64
Successfully set device (iLO) bay # 5 to IPv6 address 4001::4bc0/64
Successfully set device (iLO) bay # 6 to IPv6 address 4001::4bc1/64
Successfully set device (iLO) bay # 7 to IPv6 address 4001::4bc2/64
Successfully set device (iLO) bay # 8 to IPv6 address 4001::4bc3/64
Successfully set device (iLO) bay #1A to IPv6 address 4001::4bc4/64
Successfully set device (iLO) bay #2A to IPv6 address 4001::4bc5/64
Successfully set device (iLO) bay #3A to IPv6 address 4001::4bc6/64
Successfully set device (iLO) bay #4A to IPv6 address 4001::4bc7/64
Successfully set device (iLO) bay #5A to IPv6 address 4001::4bc8/64
Successfully set device (iLO) bay #6A to IPv6 address 4001::4bc9/64
Successfully set device (iLO) bay #7A to IPv6 address 4001::4bca/64
Successfully set device (iLO) bay #8A to IPv6 address 4001::4bcb/64
Successfully set device (iLO) bay #1B to IPv6 address 4001::4bcc/64
Successfully set device (iLO) bay #2B to IPv6 address 4001::4bcd/64
Successfully set device (iLO) bay #3B to IPv6 address 4001::4bce/64
Successfully set device (iLO) bay #4B to IPv6 address 4001::4bcf/64