Filter
Top Products
Updating the EFI Driver
If you select an EFI driver file from the Select Firmware Image menu, (such as lsimpt.rom in
Example 3-9), then press Enter, a confirmation screen appears:
You are about to install EFI Driver version 1.04.02.00
Do you want to proceed? (y/n)
If you press y, a status screen appears, displaying the progress of the operation. For example:
Installing EFI Driver Image for Seg:00 Bus:80 Dev:01
Percentage Completed - 100%
Re-initializing controller...
This operation may take up to one minute.
Firmware Image Installation successful for Seg:00 Bus:80 Dev:01
Updating Vital Product Data (VPD)...Done
Updated Seg:00 Bus:80 Dev:01 to EFI Driver Version 1.04.02.00
Press any key to continue
Press any key to return to the main menu.
Advanced Operations: Save SCSI Firmware Image or EFI Driver Image to File
To perform advanced operations, select Advanced Operations from the main menu and press
Enter. The following menu displays:
-----------------------------------------------------------------
Parallel SCSI Offline Operations Utility
(C) Copyright 2004 Hewlett-Packard Development Company, L.P.
-----------------------------------------------------------------
Save SCSI Firmware Image to file
Save EFI Driver Image to file
Display Vital Product Data (VPD)
Main Menu
To save a SCSI firmware image or an EFI driver image to a file, use the arrow keys to highlight
Save SCSI Firmware Image to file or Save EFI Driver Image to file, then press Enter to display
the “Available SCSI Ultra320 Controllers” screen; for example:
Available SCSI Ultra320 Controllers
Flash SCSI EFI
Slot Seg Bus Dev Part Firmware Driver
-------------------------------------------------------------------
XX 00 20 01 No 1.03.35.00 1.02.09.00
SCSI Ultra320 Core-IO
01 00 80 01 Yes 1.03.39.00 1.04.02.00
SCSI Ultra320 Dual-Channel PCI-X Adapter
------------------------------------------------------------------
Back
Navigate using Arrow Keys and <Tab>.Press <Enter> to Select
Use the arrow keys to highlight a SCSI controller; then press Enter to display the “Choose File
to save Firmware Image” screen. For example:
Choose File to save Firmware Image
-----------------------------------------------------------------------
<DIR> ..
new.rom Ultra320 SCSI Firmware 1.03.39.00
it_1030.fw Ultra320 SCSI Firmware 1.03.35.65
38 Configuring the A7173A Adapter