Filter
Top Products
Id Version Rate Width Device
------------------------------------------------------------------------------
0 BF1468A4B3 HPB5 Ultra320 Wide Disk
1 BD1468A4C5 HPB4 Ultra320 Wide Disk
3 BD1468A4C5 HPB4 Ultra320 Wide Disk
4 BF1468A4B3 HPB5 Ultra320 Wide Disk
5 BF1468A4B3 HPB5 Ultra320 Wide Disk
8 BF1468A4B3 HPB5 Ultra320 Wide Disk
- PROLIANT 4L7E*DB 2.30 - - Enclosure
------------------------------------------------------------------------------
NOTE: The In Use Device column is only displayed on systems running HP-UX 11i v3.
Setting the SCSI ID Online
Use the -i option on the mptconfig command to change the SCSI ID of a SCSI initiator. For
example:
# mptconfig -i 6 /dev/mpt14
Confirm: Do you want to change scsi parameters (y/[n]): y
Scan For Devices to avoid id conflict ... [Passed]
Status .................................. [Successful]
#
If you attempt to change the SCSI ID to a number that is already in use by another device, the
mptconfig -i command will fail and a message will alert you that the SCSI ID you selected
is already in use.
# mptconfig -i 5 /dev/mpt14
Confirm: Do you want to change scsi parameters (y/[n]): y
Scan For Devices to avoid id conflict ... [Failed]
Initiator id conflicts with target id: 5.
Status .................................. [Failed]
---- TARGET PARAMETERS -------------------------------------------------------
Target Description Firmware In Use In Use In Use
Id Version Rate Width Device
------------------------------------------------------------------------------
0 BF1468A4B3 HPB5 Ultra320 Wide Disk
1 BD1468A4C5 HPB4 Ultra320 Wide Disk
3 BD1468A4C5 HPB4 Ultra320 Wide Disk
4 BF1468A4B3 HPB5 Ultra320 Wide Disk
5 BF1468A4B3 HPB5 Ultra320 Wide Disk
8 BF1468A4B3 HPB5 Ultra320 Wide Disk
- PROLIANT 4L7E*DB 2.30 - - Enclosure
42 Configuring the A7173A Adapter