HP (Hewlett-Packard) C5J37AWABA Personal Computer User Manual


 
Front bezel
The front bezel is located on the front of the computer and is secured to the main system bracket with
eight Torx screws.
Replacement bezels include the webcam shutter and capacitive sensor board. On models that do not
include a webcam, you must remove the shutter and install the webcam insert (Webcam assembly
kit) into the slot in which the webcam would otherwise be installed.
To remove the front bezel:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 27).
2. Remove the access panel (see
Access panel on page 34).
3. Remove the stand (see
Stand on page 36).
4. Remove the lower panel (see
Lower panel on page 38).
5. Remove the optical drive (see
Replacing the optical disc drive on page 45).
6. Remove the metal plate (see
Metal plate on page 39).
7. Remove the power supply (see
Power supply on page 78).
8. Remove the side panels (see
Side panels on page 76).
9. Remove the speakers (see
Speakers on page 74).
10. Remove the power button board (see
Power button board on page 89).
11. Lift the bracket from the bottom-left side of the computer.
Figure 6-78 Removing the bracket
92 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis