![](http://pdfasset.owneriq.net/2/cb/2cb985cd-9511-4931-bd40-7fb053e57183/2cb985cd-9511-4931-bd40-7fb053e57183-bg62.png)
7. Remove the Torx screw (1) that secures the Mylar that covers the power button board, and then
lift the Mylar from the computer (2).
NOTE: On some models, the left screw that secures the left speaker (when viewed from the
rear) may also secure the Mylar.
Figure 6-76 Removing the Mylar shield
90 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis