![](http://pdfasset.owneriq.net/2/cb/2cb985cd-9511-4931-bd40-7fb053e57183/2cb985cd-9511-4931-bd40-7fb053e57183-bg70.png)
13. Remove the cable from its routing path.
Figure 6-91 Hood sensor cable routing path
14. Slide the hood sensor out of its slot built into the chassis.
NOTE: the hood sensor fits tightly into the slot. Removal may require a flat-blade screwdriver
to help disengage it.
Figure 6-92 Removing the hood sensor
To install the hood sensor, reverse the removal procedures.
104 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis