![](http://pdfasset.owneriq.net/2/cb/2cb985cd-9511-4931-bd40-7fb053e57183/2cb985cd-9511-4931-bd40-7fb053e57183-bg60.png)
3. Remove the two Phillips screws (1) that secure the board to the system board.
Figure 6-73 Removing the card reader board screws
4. Lift the board to a 45-degree angle (1), and then pull it away to remove it from the socket (2).
Figure 6-74 Removing the card reader board
To install the card reader board, reverse the removal procedures.
88 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis