HP (Hewlett-Packard) C5J37AWABA Personal Computer User Manual


 
Computer Setup—Security
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-3 Computer Setup—Security
Option Description
Setup Password Allows you to set and enable a setup (administrator) password.
NOTE: If the setup password is set, it is required to change Computer Setup options, flash the
ROM, and make changes to certain plug and play settings under Windows.
Power-On Password Allows you to set and enable a power-on password. The power-on password prompt appears
after a power cycle or reboot. If the user does not enter the correct power-on password, the unit
will not boot.
Device Security Allows you to set Device Available/Device Hidden for:
Embedded security device (some models)
System audio
Network controller
SATA0
SATA1
SATA2
SATA3
USB Security Allows you to enable or disable groups of USB ports or individual USB ports. Default is device
available.
Front USB Ports
USB Port 1
USB Port 2
Rear USB Ports
USB Port 1
USB Port 2
USB Port 3
USB Port 4
Accessory USB Ports
USB Port 1
USB Port 2
USB Port 3
USB Port 4
USB Port 5
USB Port 6
12 Chapter 3 Computer Setup (F10) Utility