![](http://pdfasset.owneriq.net/2/cb/2cb985cd-9511-4931-bd40-7fb053e57183/2cb985cd-9511-4931-bd40-7fb053e57183-bg72.png)
13. Disconnect the hard drive cables or the optical drive cables from the system board.
NOTE: Be careful not to damage the cable when disconnecting it from the board. Do not pull
on the wires.
14. Remove the connector from the computer.
Figure 6-94 Removing the hard drive or optical drive connectors
To install the hard drive or optical drive connector, reverse the removal procedures.
106 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis