Filter
Top Products
Improve copy and scan quality
Check the scanner glass for dirt and smudges
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect
performance. Use the following procedure to clean the scanner.
1. Press the power button to turn the product off, and then disconnect the power cable from the electrical
outlet.
2. Open the scanner lid.
3. Clean the scanner glass and the white plastic backing underneath the scanner lid with a soft cloth or
sponge that has been moistened with nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on
any part of the product; these can damage the product. Do not place liquids directly on the glass or
platen. They might seep and damage the product.
4. Dry the glass and white plastic parts with a chamois or a cellulose sponge to prevent spotting.
5. Connect the power cable to an outlet, and then press the power button to turn the product on.
Check the paper settings
LCD control panel
1. On the product control panel, press the Setup
button.
2. Open the following menus:
●
System Setup
●
Paper Setup
3. Select Def. paper size.
4. Select the name of the paper size that is in the input tray, and then press the OK button.
5. Select Def. paper type.
6. Select the name of the paper type that is in the input tray, and then press the OK button.
Touchscreen control panel
1.
From the Home screen on the product control panel, touch the Setup
button.
2. Open the following menus:
●
System Setup
●
Paper Setup
3. Select the Paper Size option, and then touch the name of the paper size that is in the input tray.
4. Select the Paper Type option, and then touch the name of the paper type that is in the input tray.
ENWW Improve copy and scan quality 91