Filter
Top Products
Removal and replacement procedures 19
6.
Slide the bezel to the right, and detach the bezel from the server.
To replace the component, reverse the removal procedure.
Removing a media drive blank
1. Power down the server (on page 16).
2. Use the T-15 Torx screwdriver to eject the drive blank, and pull the drive blank out of the server.
NOTE: The T-15 Torx screwdriver is shipped with the server and can be located on the rear panel ("Rear
panel components" on page 73).
To replace the component, reverse the removal procedure.
Removing a media drive
To remove the DVD drive, optional diskette drive, or optional CD-RW drive: