Filter
Top Products
Removal and replacement procedures 29
7.
Remove the expansion board.
To replace the component, reverse the removal procedure.
Removing the PCI-X Hot Plug mezzanine option
1. Power down the server (on page 16).
2. Extend or remove the server from the rack ("Remove the server from the rack" on page 16).
3. Remove the access panel ("Removing the access panel" on page 17).
4. Remove the expansion boards from slots 1 and 2.
5. Remove the expansion boards from slots 3 and 4, if installed, to gain access to the mezzanine
board.
6. Remove the PCI-X Hot Plug basket ("Removing the PCI-X Hot Plug basket" on page 28).
7. Disconnect the cable from the PCI-X Hot Plug mezzanine board.
8. Loosen the thumbscrews, and lift the mezzanine board from the server.