Filter
Top Products
Server component identification 77
Item Description Item Description
7
Connectors for one of the
following:
• PCI-X Hot Plug
mezzanine option
• PCI Express x4
mezzanine option
• PCI Express x8
mezzanine option
18
Boot device selector switch
(default = FLP TOP)
8
PCI-X non-hot-plug slot 3, 64-
bit/133-MHz
19 SCSI port A
9
PCI-X, non-hot-plug slot 4, 64-
bit/133-MHz
20
SCSI simplex/duplex switch
(default = duplex)
10
PCI-X, non-hot-plug slot 5, 64-
bit/133-MHz
21 Port 84/85 code switch
11
PCI-X, non-hot-plug slot 6, 64-
bit/100-MHz
22 SCSI port B
System maintenance switch
The system maintenance switch (SW1) is an eight-position switch that is used for system configuration. The
default position for all eight positions is Off.
Position Description Function
S1 iLO Security Off = iLO security is enabled
On = iLO security is disabled
S2
Configuration
lock
Off = System configuration can
be changed
On = System configuration is
locked
S3 Reserved Reserved
S4 Reserved Reserved
S5
Password
protection
override
Off = No function
On = Clears power-on
password and administrator
password
S6
Invalidate
configuration
Off = Normal
On = Clears NVRAM
S7 Reserved Reserved
S8 Reserved Reserved
Boot device selector switch
The boot device selector switch setting determines the device access order of the multibay drives in the
server. The default setting for the boot device selector switch is FLP TOP.