Filter
Top Products
Removal and replacement procedures 27
7.
Remove the PCI latch by pushing up on the clear plastic piece of the PCI latch that extends below the
chassis under the latch.
To replace the component, reverse the removal procedure.
Removing a PCI retaining clip
1. Power down the server (on page 16).
2. Extend or remove the server from the rack ("Remove the server from the rack" on page 16).
3. Remove the access panel ("Removing the access panel" on page 17).
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all
expansion slots have either an expansion slot cover or an expansion board installed.
4. Open the PCI latch, and unlock the PCI retaining clip.
5. Remove the expansion board from the slot, if installed ("Removing a PCI-X Hot Plug expansion
board" on page 47).
6. Remove the PCI retaining clip.