Filter
Top Products
SRM Console A-39
A.16 Depositing and Examining Data
The deposit command stores data in a specified location. The examine
command displays contents of a memory location, register, or device.
Syntax: deposit [-{b,w,l,q,o,h}] [-{n value, s value}] [space:] address data
examine [-{b,w,l,q,o,h}] [-{n value, s value}] [space:] address
-b
Defines data size as byte.
-w
Defines data size as word.
-l (default)
Defines data size as longword.
-q
Defines data size as quadword.
-o
Defines data size as octaword.
-h
Defines data size as hexword.
-d Instruction decode (examine command only)
-n value
The number of consecutive locations to modify.
-s value
The address increment size. The default is the data size.
space:
Device name (or address space) of the device to access.
address
Offset within a device to which data is deposited. Can be:
dev_name
A device name.
fpr- name
The floating-point register set; name
is F0 to F31.
gpr- name
The general register set; name is R0
to R31.
ipr- name
The internal processor registers.
pt- name
The PALtemp register set; name is
PT0 to PT23.
pmem
Physical memory (default).
vmem
Virtual memory.
data
Data to be deposited.