Filter
Top Products
SRM Console A-5
Table A-1 Summary of SRM Console Commands (continued)
Command Function
more
Displays a file one screen at a time.
prcache
Utility that initializes and displays status of the
optional PCI NVRAM device.
set envar
Sets or modifies the value of an environment
variable.
set host
Connects to an MSCP DUP server on a DSSI device.
set password
Sets the console password for the first time or
changes an existing password.
set secure
Enables secure mode without requiring a restart of
the console.
show envar
Displays the state of the specified environment
variable.
show config
Displays the configuration at the last system
initialization.
show cpu
Displays the state of each processor in the system.
show device
Displays a list of controllers and their devices in the
system.
show ide
Displays the internal register setup for the primary
and secondary IDE controllers.
show memory
Displays memory module information.
show pal
Displays the version of the privileged architecture
library code (PALcode).
show power
Displays information about the power supply, system
and PCI fans, CPU fan, and temperature.
show version
Displays the version of the console program.
stop
Halts the processor. (Same as halt.)
test
Runs firmware diagnostics for the system.