Filter
Top Products
2-8 AlphaServer DS20L User’s Guide
2.3.3 PCI Options
Refer to Figure 2-7 and follow these steps to add or remove PCI options.
CAUTION: To prevent over-flexing the PCI riser or module, use your hands to
support them as you install or remove the PCI module.
1. Remove the cover (see Section 2.3.1).
2. Determine the slot
you wish to use for the PCI module . Remove the
retaining screw and slot cover to expose the slot.
3. Line up the fingers and the notch on the PCI module with the appropriate
connector on the PCI riser
. While supporting the back of the PCI riser,
press the module into place in the slot.
4. Insert the retaining screw through the side of the enclosure and the PCI
module’s bracket
.
To remove a PCI module, remove the retaining screw. Grasp the PCI module
and work out from its connector on the PCI riser.