Filter
Top Products
Installation and Options 2-3
2.2 Installing Options
This section describes how to remove the bezel and/or cover and install
memory, PCI options, CD-ROM, or a hard drive.
2.2.1 Bezel Removal
NOTE: It is not necessary to remove the front bezel to open the cover to access
the inside of the enclosure.
You only have to remove the front bezel if you need to access the front of the
enclosure to insert or remove a CD, to remove or install the hard drive or the
CD-ROM drive, or remove the system from a rack.
Figure 2-2 shows how to remove the front bezel
from the enclosure .
1. Place a finger in each side tab of the bezel and pull it gently forward to
disengage the bezel from the tabs on the front of the enclosure.
Figure 2-2 Removing the Front Bezel
2
3
MR0360
1
3