Filter
Top Products
Break Out Box Cables
Making a Custom Break Out Box Cable
A cable to connect the Break Out Box with the HP E1432A/33A is supplied
with the each of the Break Out Boxes described in this chapter. However,
this section is included for those users who may want to make their own
connecting cable. The drawing on this page shows the AMP part numbers
for the parts you will need to make the plug end of the cable. This
illustration shows an HP E1432-61602 Voltage Break Out Box, an HP
E3242A Break Out Box requires a single cable with connectors at both ends.
The next page shows the pinout for the connector.
Backshell kit, plug
part number AMP 750850-3
qty: 2
Shielded cable
qty: 2
Cable Connector, plug
part number AMP 750833-1
qty: 2
8CHINPUT
VOLTAGE
Figure 8-18: Break Out Box cable and part numbers
HP E1433A User's Guide
Break Out Boxes
8-5