Filter
Top Products
HP E1459A SCPI Command Reference 45
DISPlay:MONitor[:STATe] <
state
>
Turns the Display Mode on or off.
Parameters
Comments • DISP:MON ON enables the terminal display of Port parameters. The
parameters are updated to the terminal following each new command
accessing a Port.
• The displayed data is in the format:
-- Displayed port number: 0, 1, 2, or 3
-- Size of the data: 16-bit word or 32-bit word
-- Actual data: signed decimal and hexadecimal
• A keyboard entry at the terminal sets DISP:MON OFF.
• *RST Condition: OFF.
Example DISP:MON ON
turns the display mode on.
DISPlay:MONitor[:STATe]?
Returns the value of the Display Monitor State as either 0 (for OFF) or 1 (for ON).
Parameters None
Comments • DISP:MON[:STAT]? returns a 1 if the monitor mode is on; or returns a 0 if the
monitor mode is off.
Example DISP:MON?
Parameter Name Parameter Type Range of Values Default
<state> Numeric or discrete 0 | 1 | OFF | ON OFF